Ask HiltiAskLearnArticles
Ask Hilti

Hilti Profis Anchor won't run

Posted by Isaac Simmonsalmost 6 years ago
Hilti Profis Anchor won't run

I have installed the latest version of Hilti Profis Anchor (2.7.7), but when I click on the icon or even try to run it as administrator, it won't open. I did notice that the region and language selection (United States) was acting funny. That may or may not be related.

Hilti Profis Anchor won't start,Region,Latest Update

3 Replies
Posted by PARIS STANTONover 4 years ago
Hilti Verified

Hello,

Please refer to this answer from a previous question.

Regards,
Paris


Posted by Bryan Johnsonalmost 6 years ago
Hilti Verified

Issac,

For further assistance, it would be best to contact our Engineering Support Group at hnatechnicalservices@hilti.com or call them at 877-749-6337.

Let us know if you have any additional questions.

Regards,

Bryan


Posted by Dave Polzerabout 5 years ago

I run a dell Precision t1700 workstation with 3 monitors. 2 connected to an NVIDIA Quadro K620 and one connected to the builtin Video Card Intel HD 4600. Hilti Profis Anchor will not run when the nvidia card is set to be the primary display. If I switch the Primary display in windows over to the Intel HD card Hilti opens up. This is very annoying and frustrating as the NVIDIA card is far superior and I need it to be the Primary monitor for my CAD applications. Switching Primary displays is a pain in the ass and quite frankly a ridiculous step to take to simply run Hilti. This also happens on another machine with an AMD card in a machine with built in Intel graphics driver

Hilti Fails to Start

1 comment on this reply
Posted by Jonasover 4 years ago
I agree. Same problem and mostely the same setup as Dave Polzer. Dell Precision 5530, Quadro P2000 as primary GPU, single external 4k monitor. Hilti should respond with a solution to the issue.