Support Reactions are:
Fx: 2.456kn(Horizontal) Fy: 4.678kn(Horizontal) & Fz:23.765 kn(vertical DOWNWARD) acting at a distance of 150 mm from face of existing RC column as shown in attached fig..
I have designed anchor plate with Adhesive HVA chemical bolts as SHOWN IN ENCLOSED PDF FILE.
PLEASE CKECK IT WHETHER IT IS SAFE.
Engr. Mahaboob,
Which method are you using for design? Hilti is not a registered design firm and cannot comment directly on whether an anchor system is applicable for a design. Hilti does provide technical references for the designer to utilize to evaluate an anchor system to assist the designer with the final judgement. This information can be found on the HVU Product Page (https://www.hilti.com/anchor-systems/capsule-adhesive-anchors/r190) under Documents & Videos.
If you have any other questions, please feel free to contact us.
Regards,
Bryan